易高Elcometer│3230卷材涂料湿膜测厚仪

产品简介

英国易高Elcometer 3230卷材涂料湿膜轮与Elcometer 3230 湿膜轮相似，但测量卷材涂料湿膜厚度。由三个圆轮组成，外侧的两个圆轮外圈为滚齿形，在很滑的涂层上或基体快速移动时可测量的厚度。沿湿膜滚动湿膜轮，中心轮湿润部分末端的读数即为湿膜厚度。如果知道涂层的干、湿比率，便可通过湿膜厚度计算干膜厚度。

产品型号：3230卷材湿膜轮

更新时间：2017-07-22

厂商性质：代理商

访问量：1284

产品咨询 13802268624

详细介绍在线留言

品牌	ELCOMETER/英国易高

如有任何问题请与我司业务专员：
：豪
:fuhao@17Lp.com

How to use a Wet Film Wheel - Elcometer 3230 Wet Film Wheel

ISO 2808-7B, BS 3900-C5 method 7B, ASTM D4414-A specify that the wet film wheel should be perpendicular to the substrate and the thickness of the coating should be stated as that indicated on the central wheel - ensuring that the wheel has been rolled from maximum thickness to minimum thickness - thus avoiding surface tension.

Example

Hold the wheel by its central spindle. Begin at maximum thickness to reduce risk of inaccuracy caused by surface tension.

Roll the wheel through the wet film with the side 1 in the diagram touching the substrate. Roll for at least one whole turn and slowly enough for wetting to occur. Roll the wheel backwards by at least on complete turn. The wet film thickness is read from the scale, at the end of the wetted segment of the middle circle, 2 in the diagram

To use wheel on pipes, measure across the longitudinal axis （lengthways） of the pipe.

On rough surfaces, measurements will be made from the surface peaks and represent the minimum wet film thickness.

Elcometer 3230 卷材涂料湿膜轮

型号	分类	量程	分度	零件号
Elcometer 3230/17	Elcometer 3230 湿膜轮-卷材涂料	0~50μm	2.5μm	K0003230M017
Elcometer 3230/18	Elcometer 3230 湿膜轮-卷材涂料	0~100μm	5.0μm	K0003230M018
Elcometer 3230/19	Elcometer 3230 湿膜轮-卷材涂料	0~300μm	15.0μm	K0003230M019
Elcometer 3230/17a	Elcometer 3230 湿膜轮-卷材涂料	0~2mils	0.1mils	K0US3230M017
Elcometer 3230/18a	Elcometer 3230 湿膜轮-卷材涂料	0~4mils	0.2mils	K0US3230M018
Elcometer 3230/19a	Elcometer 3230 湿膜轮-卷材涂料	0~12mils	0.5mils	K0US3230M019
附件	50cm（19″）湿膜轮手柄			KT003230N002
附件	100cm（39″）湿膜轮手柄			KT003230N001